9 catalog 65910 dimensions are in inches and dimensions are shown for technical support revised 7-07 millimeters unless otherwise reference purposes only. usa: 1-800-522-6752 central america: 52-55-5-729-0425 specified. values in brackets specifications subject to change. canada: 1-905-475-6222 south america: 55-11-3611-1514 are metric equivalents. mexico: 01-800-733-8926 www.tycoelectronics.com amp precision pin and socket contacts note: all part numbers are rohs compliant. signal contacts material and finish see chart. contact body rass or phosphor bronze retention spring tainless steel application tooling age 29 technical documents 114-10004 application specification 108-10042 product specification type iii+, crimp, snap-in pin s ocket [ .0625 +.0010 C .0020 [ 1.588 + 0.025 ] C.051 dia. max. dia. pin body spring, stainless steel spring, s tainless steel ferrule, brass, nickel flash .530 .010 [13.46 0.25 ] .113 [2.87] .390 [9.91] min. contact size 16in diameter .062 [1.57] (test current, 13 ampere)? w ire size i ns. contact s trip form loose piece tooling part no.** range dia. finish contact no. contact no. l oose piece strip form a wg mm 2 range p in socket pin socket hand tool applicators . 015-.030 gold/nickel 2 788085-3 7 88088-2 567867-1*** 3 0-28 0.05-0.09 0 .38-0.76 sel. gold/nickel 3 788085-1 788088-1 788085-4 788088-3 9 0716-1 or 567947-1*** or 680602- *** bright tin 1 -66425-2 1-66424-1 . 040-.060 1 gold/nickel 2 66425-7 66424-7 66429-3 66428-3 91515-1 6 466598- *** 30-26 0.05-0.15 1 .02-1.52 sel. gold/nickel 3 66425-8 66424-8 66429-4 66428-4 .014-.030 1 gold/nickel 2 66393-7 6 6394-7 0.36-0.76 sel. gold/nickel 3 66393-8 66394-8 66406-4 66405-4 90225-2 6 466585-3*** bright tin 1-66106-5 1-66108-5 1-66107-1 1-66109-7 91515-1 6 466321- *** 26-24 0.12-0.2 .035-.055 1 gold/nickel 2 66106-7 66108-7 66107-3 66109-3 or or 0.89-1.40 sel. gold/nickel 3 66106-8 66108-8 66107-4 66109-4 58495-1* 466908-2*** sel. gold/nickel 4 66108-1 66109-1 bright tin 2-66102-5 3-66104-0 1-66103-8 1-66105-9 .040-.080 1 gold/nickel 2 66102-8 66104-8 66103-3 66105-3 91515-1 6 466323- *** 1.02-2.03 sel. gold/nickel 3 66102-9 66104-9 66103-4 66105-4 or or 2-66102-2 7 2-66104-3 7 58495-1* 466907-2*** sel. gold/nickel 4 66104-1 66105-1 24-20 0.2-0.6 .060-.120 5 bright tin 1-66564-2 1-66563-1 66566-7 66565-7 466383-4*** 1.52-3.05 sel. gold/nickel 3 66564-8 66563-8 66566-4 66565-4 91542-1 6 or 466979-1*** or 567363- *** bright tin 1-66332-4 1-66331-4 1-66400-0 1-66399-0 91523-1 6 466324- *** .080-.100 1 gold/nickel 2 66332-7 66331-7 66400-3 66399-3 or or 2.03-2.54 sel. gold/nickel 3 66332-8 66331-8 66400-4 66399-4 90225-2 6 466942-1*** sel. gold/nickel 4 66331-2 66399-2 1-66098-9 s bright tin 1-66098-8 1-66100-9 1-66099-5 1-66101-9 91505-1 6 or 466325- *** 18-16 0.8-1.4 .080-.100 1 gold/nickel 2 66098-8 66100-8 66099-3 66101-3 91523-1 6 or or 2.03-2.54 sel. gold/nickel 3 66098-9 66100-9 66099-4 66101-4 58495-1* 466906-1*** sel. gold/nickel 4 66098-6 66099-1 bright tin 1-66359-4 1-66358-6 1-66361-2 1-66360-2 .080-.100 1 phos bronze 1-66359-5 1-66358-8 1-66359-5 1-66358-8 466326- *** gold/nickel 2 66359-9 66358-9 66361-3 66360-3 91519-1 6 or 2.03-2.54 sel. gold/nickel 3 1-66359-0 1-66358-0 66361-4 66360-4 466923-2*** 18-14 0.8-2.0 1-66359-2 1-66358-3 66361-8 66360-8 sel. gold/nickel 4 66358-1 66360-1 .110-.150 5 bright tin 66597-8 66598-9 66602-8 66601-9 466958-1*** 1-66598-0 91521-1 6 or 2.79-3.81 sel. gold/nickel 3 66597-2 66598-2 66602-2 66601-2 567364- *** 1 overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18]. 2 .000015 [0.00038] gold in the mating area over .000050 [0.00127] min. nickel. 3 .000030 [0.00076] gold in the mating area, with gold flash on remain- der, over .000050 [0.00127] min. nickel. 4 .000030 [0.00076] gold in the mating area, with gold gradient on remainder, over .000050 [0.00127] min. nickel. 5 contacts can only be used in: metrimate; cpc series 1 (arr. 23- 24), series 4 (arr. 23-13m, 23-16m, 23-22m), and vde connectors. 6 to use with the 626 pneumatic tool: remove crimping head from straight action hand tool (saht), order saht adapter part no. 217201-1 , adapter holder part no. 356304-1 (with ratchet) or 189928-1 (without), and power unit part no. 189721-1 (hand actuated) or 189722-1 (foot actuated). 7 phosphor bronze s standard reeling of strip form contacts. *commercial pro-crimper ii hand tool for field repair only. note: die set can be adapted for use with 626 pneumatic tool system. insertion tool part no. 91002-1 (for insulation diameters .070 [1.78] or less), no. 200893-2 (for insulation diameters .090 [2.29] max.). extraction tool part no. 305183. (instruction sheet 408-1216) **there are power options available for these tools/dies. see battery powered crimp tool kit and sde electric terminator on page 30. *** call technical support for machine applicator part numbers. socket pin ?single contact, free-air test current is not to be construed as contact rating current. use only for testing. r efer to contact current carrying capability information on page 8.
10 catalog 65910 dimensions are in inches and dimensions are shown for technical support revised 7-07 millimeters unless otherwise reference purposes only. usa: 1-800-522-6752 central america: 52-55-5-729-0425 specified. values in brackets specifications subject to change. canada: 1-905-475-6222 south america: 55-11-3611-1514 are metric equivalents. mexico: 01-800-733-8926 www.tycoelectronics.com amp precision pin and socket contacts material contact body and tab rass retention spring tainless steel finish see chart on page 11. pin solder-type (with preformed wire barrel/insulation support) socket socket type iii+, solder versions spring, stainless steel localized plate area pin body, brass 1.085 [27.56] max. .825 [20.96] max. 3.90 [9.91] min. .200 [5.08] min. .0625 +.0010 .0625 C0020 [ 1.588 +.0254 ] dia. [1.588 C .0508 ] .530 .010 [13.46 ?.25 ] signal contacts ( continued) type iii+, crimp, snap-in contact size 6 pin diameter 062 [1.57] material and finish contact body opper alloy, plated tin or gold spring tainless steel w ire size range i ns. g rounding pin part no. s trip form loose piece dia. contact applicator hand tool** [mm 2 ] awg range 1 f inish strip form loose piece part no. part no. .035-.055 tin 164159-3 164162-1 91515-1 3 or 0.12-0.2 2 6-24 0 .89-1.4 s el. gold/nickel 2 1 64159-4 164162-2 5 8495-1* .045-.070 tin 164160-3 164163-1 4 66323- * ** 91515-1 3 or 0 .2-0.6 24-20 1 .14-1.78 o r 91505-1 3 or sel. gold/nickel 2 164160-4 164163-2 466907-2*** 58495-1* .078-.098 tin 164161-3 164164-1 466741- *** 91523-1 3 or 0.8-1.4 1 8-16 1.98-2.49 or 9 1505-1 3 or sel. gold/nickel 2 164161-4 1 64164-2 680114-3*** 58495-1* 1 o verall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18]. 2 gold flash over .000030 [0.00076] min. nickel on entire contact, with .000030 [0.00076] gold in contact area. 3 t o use with the 626 pneumatic tool system: remove the crimping head from the straight action hand tool (saht) assembly, order saht adapter p art no. (call technical support at 800-522-6752) , adapter holder part no. 356304-1 (with ratchet) or 189928-1 (without), and power unit part no. 189721-1 (hand actuat- ed) or 189722-1 (foot actuated). *commercial pro-crimper ii hand tool for field repair only. note: die set can be adapted for use with the 626 pneumatic tool system. ** there are power options available for these tools/dies. see battery powered crimp tool kit and sde electric terminator on page 30. ***call technical support at 1-800-522-6752 for automatic machine applicator part numbers. extraction tool part no. 725840-1 note: all part numbers are rohs compliant. grounding pin (make first - break last) r elated product data application tooling ages 29, 30 technical documents age 4 pin
11 catalog 65910 dimensions are in inches and dimensions are shown for technical support revised 7-07 millimeters unless otherwise reference purposes only. usa: 1-800-522-6752 central america: 52-55-5-729-0425 specified. values in brackets specifications subject to change. canada: 1-905-475-6222 south america: 55-11-3611-1514 are metric equivalents. mexico: 01-800-733-8926 www.tycoelectronics.com amp precision pin and socket contacts note: all part numbers are rohs compliant except: t indicates non-rohs compliant. material contact body and tab rass retention spring tainless steel finish see chart. p in p in s older tab socket socket contact size 16in diameter .062 [1.57] (test current, 13 ampere) wire size loose piece range contact contact no. awg [mm 2 ] finish pin socket 26-20 0.12-0.6 gold/nickel 1 2 66182-1 t 2 66183-1 t 18-16 0.8-1.4 gold/nickel 1 2 66180-1 t 2 66181-1 t solder duplex 2 202236-7 t 202237-7 t tab bright tin 202236-5 t 202237-5 t 1 .000030 [0.00076] gold in mating area over .000050 [0.00127] nickel. 2 duplex plated .000030 [0.00076] gold in mating area over .000050 [0.00127] nickel on contact body; bright tin-lead on solder tab. 3 bright tin on entire contact. note: these contacts can be used in multimate contact cavities of all connector housings. ? single contact, free-air test current is not to be construed as contact rating current. use only for testing. refer to contact current carrying capability information on page 3. extraction tool part no. 305183 (instruction sheet 408-1216) type iii+, solder versions (continued) s pring, stainless steel pin body, brass localized plate area spring s tainless steel ferrule, brass, nickel flash body brass solder post brass .390 [9.91] min. 1.112 [28.24] max. .365 [9.27] max. .365 [9.27] max. .020 [0.51] . 058 [ 1.47] .105 [2.67] .865 [21.97] .120 [3.05] .200 [5.08] min. .794 ?010 [20.17 ?.25 ] .530 ?010 [13.46 ?.25 ] .0625 +.0010 .0625 C0020 [ 1.588 + .0254 ] [1.588 C0508 ] signal contacts ( continued)
12 catalog 65910 dimensions are in inches and dimensions are shown for technical support revised 7-07 millimeters unless otherwise reference purposes only. usa: 1-800-522-6752 central america: 52-55-5-729-0425 specified. values in brackets specifications subject to change. canada: 1-905-475-6222 south america: 55-11-3611-1514 are metric equivalents. mexico: 01-800-733-8926 www.tycoelectronics.com amp precision pin and socket contacts signal contacts ( continued) material contact body and post rass retention spring tainless steel finish see chart. pin pin socket socket type iii+, posted ( replacement contacts, s ee note below) contact size 16in diameter .062 [1.57] (test current, 13 ampere) loose piece contact no. termination post contact 3 termination high post 2 termination high post 1 termination high post method configuration finish pin socket pin socket pin socket .025 x .025 sel. gold/nickel 1 6-66460-4 6-66461-3 6-66460-3 6-66461-2 6-66460-2 5-66461-5 0.64 x 0.64 bright tin 6-66460-6 5-66461-9 6-66460-7 5-66461-8 6-66460-5 5-66461-4 .045 x .045 sel. gold/nickel 1 1-66471-5 2-66473-0 1-66471-8 1-66473-9 wrap-type 1.14 x 1.14 bright tin 1-66471-7 1-66473-8 1-66471-6 1-66473-7 .031 x .062 sel. gold/nickel 1 1-66470-1 1-66470-0 0.79 x 1.57 termi-point .031 x .062 sel. gold/nickel 1 1-66468-3 1-66459-0 clip 0.79 x 1.57 1 gold flash over .000050 [0.00127] nickel on entire contact, with .000030 [0.00076] gold to a distance of .200 [5.08] from mating end. gold thickness controlled on socket o.d. posts plated tin-lead over copper. extraction tool part no. 305183 (instruction sheet 408-1216) insertion tool part no. 200893-2 note: these contacts are used as replacement contacts for all posted connectors. ? single contact, free-air test current is not to be construed as contact rating current. use only for testing. refer to contact current carrying capability information on page 3. note: all part numbers are rohs compliant. .062 [1.58] dia. ref. .525 [13.34] .025 ?001 [0.64 ?.03 ] point of gold plating thk. measurement b ody brass post brass spring stainless steel .025 [0.64] .100 [2.54]
13 catalog 65910 dimensions are in inches and dimensions are shown for technical support revised 7-07 millimeters unless otherwise reference purposes only. usa: 1-800-522-6752 central america: 52-55-5-729-0425 specified. values in brackets specifications subject to change. canada: 1-905-475-6222 south america: 55-11-3611-1514 are metric equivalents. mexico: 01-800-733-8926 www.tycoelectronics.com amp precision pin and socket contacts signal contacts ( continued) material and finish see chart. contact body opper nickel alloy retention spring tainless steel related product data application tooling pages 75-78 technical documents 114-10004 application specification 108-10024-2 product specification enhanced high current type iii+, crimp, snap-in ratings multiplication rating factor (f) pin socket [ .0625 +.0010 C .0020 [ 1.588 + 0.025 ] C.051 dia. max. dia. pin body spring, stainless steel spring, stainless steel ferrule, brass, n ickel flash .530 ?010 [13.46 ?.25 ] .113 [2.87] .390 [9.91] min. contact size 16in diameter .062 [1.57] wire size ins. c ontact strip form loose piece tooling part no.** r ange d ia. f inish c ontact no. contact no. loose piece strip form awg mm 2 r ange pin socket pin socket hand tool applicators 466326- *** .080-.100 1 gold 1-66359-6 1-66358-9 1-66361-4 1-66360-4 9 1519-1 3 o r 1 8-14 0.8-2.0 2.03-2.54 tin 1 -66359-9 2-66358-1 1-66361-6 1-66360-6 466923-2*** .110-.150 2 gold 1 -66597-0 1-66598-1 66602-9 1-66601-0 466958-1*** 2 .79-3.81 t in 1-66597-1 1-66598-2 1-66602-0 1-66601-2 9 1521-1 3 or 5 67364- * ** s ocket p in 1 overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18]. 2 contacts can only be used in cpc, series 1 (arr. 23-24), series 4 (arr. 23-13m, 23-16m, 23-22m), and vde connectors. 3 to use with the 626 pneumatic tool system: remove the crimping head from the straight action hand tool (saht) assembly, order saht adapter part no. 217201-1 , adapter holder part no. 356304-1 (with ratchet) or 189928-1 (without), and power unit part no. 189721-1 (hand actuated) or 189722-1 (foot actuated). ** there are power options available for these tools/dies. see battery powered crimp tool kit and sde electric terminator on page 30. *** call technical support for automatic machine applicator part numbers. note: all part numbers are rohs compliant. voltage: 250 volts ac/dc 600 volts ac/dc, series i, vde tested and select loaded only base current: type iii+ contacts: 17 amperes, 30?c temperature rise with single contact on 14 awg wire enhanced high current type iii+ contacts: 25 amperes , 30?c temperature rise with single contact on 14 awg wire temperature: -55?c to +105?c vde 0627: x a/630/4kv/2 - series i, vde tested only type iii+ contacts (note: 1 = 17 amperes) single circuit @ 50% 100% shell size wire size wire size wire size 30 awg 14 awg 30 awg 14 awg 30 awg 14 awg 11-4 .291 1 .212 .905 .140 .684 13-9 .278 .995 .175 .750 .134 .567 17-16 .270 .990 .146 .625 .127 .472 23-24 .281 .985 .138 .550 .120 .416 23-37 .275 .985 .131 .497 .114 .376 enhanced high current type iii+ contacts (14 awg wire only - note: 1 = 25 amperes) single circuit @ 50% 100% shell size 14 awg 14 awg 14 awg 11-4 .880 .840 .640 13-9 .880 .640 .480 17-16 .880 .520 .400 23-24 .880 .520 .400 23-37 .880 .440 .320 percent connector loading percent connector loading enhanced high current contacts & m series connectors: (note: 1 = 24 amperes) single circuit @ 50% @ 100% 14 awg 14 awg 14 awg 1 .292 .250 enhanced high current contacts & metrimate connectors: (note: 1 = 24 amperes) single circuit @ 50% @ 100% 14 awg 14 awg 14 awg 1 .458 .375
14 catalog 65910 dimensions are in inches and dimensions are shown for technical support revised 7-07 millimeters unless otherwise reference purposes only. usa: 1-800-522-6752 central america: 52-55-5-729-0425 specified. values in brackets specifications subject to change. canada: 1-905-475-6222 south america: 55-11-3611-1514 are metric equivalents. mexico: 01-800-733-8926 www.tycoelectronics.com amp precision pin and socket contacts 14 signal contacts ( continued) contact size 16in diameter .062 [1.57] (test current, 13 ampere) tooling part no.** wire size ins. tape mounted loose piece contact tape mounted loose piece range dia. contact no. 2 contact no. color dies for die set for hand awg mm 2 range 1 pin socket pin socket code amp-tapetronic 626 pneumatic tool machine 69875 tool system .035-.055 0.89-1.40 201611-4 201611-1 4 201613-1 5 red/red 91538-1 * .048-.065 90230-1 7 or 601967-1 * 28-24 0.08-0.20 1.22-1.65 201334-1 4 201332-1 5 red/red 90249-2 .095-.110 601967-1 * 2.41-2.79 202410-1 4 202411-1 5 green .040-.062 91538-1 * 1.02-1.57 201578-4 201578-1 4 201580-1 5 yellow/red or 58541-1* 24-20 0.2-0.6 .055-.088 90249-2 90230-1 7 or 601967-1 * 1.40-2.16 201330-6 201328-9 201330-1 4 201328-1 5 yellow/red 18 0.9-0.9 no. ins. 91539-1 * (two) (two) support 202725-1 4 202726-1 4 blue 90231-2 7 or 601967-1 * .080-.105 90136-1 * 2.03-2.67 202507-1 4 202508-1 5 or 601967-1 * 18-16 0.8-1.4 200336-6 200333-8 200336-1 4 200333-1 4 blue/blue 90250-1 90231-2 7 91539-1 * no ins. 58541-1* support ,6 204219-1 5,6 blue/blue or 601967-1 * 3 212618-2 3 212618-1 3,6,? violet/blue 90250-1 90231-2 7 91539-1 - no ins. 201570-2 201568-3 201568-1 5 58541-1* 14 2 support 201570-1 4 violet/blue or 601967-1 * 1 overall insulation crimp diameter, including crimp barrel, must not exceed .125 [3.18]. 2 for amp-tapetronic machine no. 69875, order contacts by tape mounted contact no., plus packaging code m reel?5000 parts per reel). 3 grounding pin is used to provide a make-first/break-last condition when mating and unmating connector halves. 4 use turret th502 ( 1-601967-6 ) with hand tool 601967-1 . 5 use turret th501 ( 1-601967-5 ) with hand tool 601967-1 . 6 pin length is .630 .005 [16.002 .127 ] on these two pins. 7 die set requires ?ead adapter part no. 318161-1 ; adapter holder part no. 356304-1 (with ratchet) or 189928-1 (without); and power unit part no. 189721-2 (hand actuated) or 189722-2 (foot actuated). *commercial pro-crimper ii hand tool for field repair use only. note: die set can be adapted for use with the 626 pneumatic tool system. **there are power options available for these tools/dies. see battery powered crimp tool kit and sde electric terminator on page 30. ?does not use hand tool 91539-1 or 601967-1.? single contact, free-air test current is not to be construed as contact rating current. use only for testing. refer to contact current carrying capability informa - tion on page 8. insertion tool part no. 200893-2 (for insulation diameters .070 [1.78] or less). extraction tool part no. 305183. note: all part numbers are rohs compliant. type ii, screw machined, crimp material contact body rass retention spring tainless steel finish contact body 000030 [0.00076] gold over .000050 [0.00127] nickel. gold thickness controlled on socket o.d. retention spring stainless steel related product data application tooling ages 75--8 p in pin s ocket socket .795 ?010 [20.19 ?.25 ] .472 ?005 [11.99 ?.13 ] .062 ?001 [1.57 ?.03 ] dia. spring spring socket body p in body .107 max. dia. [2.72] 1.087 ?010 [27.61 ?.25 ]
15 catalog 65910 dimensions are in inches and dimensions are shown for technical support revised 7-07 millimeters unless otherwise reference purposes only. usa: 1-800-522-6752 central america: 52-55-5-729-0425 specified. values in brackets specifications subject to change. canada: 1-905-475-6222 south america: 55-11-3611-1514 are metric equivalents. mexico: 01-800-733-8926 www.tycoelectronics.com amp precision pin and socket contacts 15 signal contacts ( continued) material pin body rass socket hosphor bronze contact finish a elect gold flash over nickel on entire contact, with additional .000030 [0.00076] gold on mating end b uplex plated .000030 [0.00076] gold on mating end, tin on termination end, with entire con- tact nickel underplated c old flash over nickel on entire contact d uplex plated gold flash on mating end, tin on termination end, with entire contact nickel underplated insertion/extraction tool part no. 91285-1 instruction sheet08--404 this tool includes interchangeable tips to insert/extract: size 22, 28-22 awg [0.08-0.03mm 2 ] crimp contacts size 20, 28-20 awg [0.08-0.6mm 2 ] crimp and solder cup contacts size 20, posted contacts p in socket socket size 20 df, crimp, snap-in contact size 0 pin diameter 040 [1.02] *see product spec 108-40005 .085 [2.16] dia. max. .085 [2.16] dia. max. .390 [9.91] .370 [9.34] .555 [14.1] .575 [14.61] [ .0400 ?0015 [1.02 0.034 ] dia. localized gold plate area localized gold plate area .150 [ 3.81] .055 [1.40] min. contact part nos. tooling** color wire ins. contact pin socket code size dia. finish strip form hand (loose range max. code strip form loose piece strip form loose piece applicator ?? tool piece) a 66507-3 t 66507-9 t 66505-3 t 66505-9 t .040 b 1658540-1 t 1658540-5 t 1658538-2 t 466423- ?? t blue 28-24 1.02 c 66507-4 t 1-66507-0 t 66505-4 t 1-66505-0 t or 466901-1 ?? t 91503-1 ? t dot awg d 1658540-5 t 1658540-2 t 1658538-3 t 1658538-1 t or 1016015-1 ?? t [0.08-0.2 a 66682-2 t 66682-4 t 66683-2 t 66683-4 t 466758-2 ?? t mm 2 ] .060 b 5066682-9 t 1-5066683-0 t or 466963-1 ?? t 91549-1 ? t black 1.52 d 5066682-6 t 5066683-7 t or 567804-1 ?? t dot 26-22 a 745254-2 t 745254-6 t 745253-2 t 745253-6 t awg .050 b 1658544-2 t 1658544-1 t 1658543-2 t 1658543-1 t 466968-1 ?? t yellow [0.12-0.4 1.27 c 745254-3 t 745254-7 t 745253-3 t 745253-7 t or 567036- ?? t 91525-1 ? t dot mm 2 ] d 1658544-3 t 1658543-3 t or 567849-1 ?? t 24-20 a 66506-3 t 66506-9 t 66504-3 t 66504-9 t 466422- ?? t awg .060 b 1658539-1 t 1658539-3 t 1658537-3 t 1658537-4 t or 466900-1 ?? t red [0.2-0.6 1.52 c 66506-4 t 1-66506-0 t 66504-4 t 1-66504-0 t or 567801-1 ?? t 91503-1 ? t dot mm 2 ] d 1658539-2 t 1658539-4 t 1658537-1 t 1658537-2 t or 1016002-1 ?? t ?to use with the 626 pneumatic tool system: remove the crimping head from the straight action hand tool (saht) assembly, order saht adapter part no. (call technical support at 800-522-6752) , adapter holder part no. 356304-1 (with ratchet) or 189928-1 (without), and power unit part no. 189721-1 (hand actuated) or 189722-1 (foot actuated). ??for complete information on amp strip form applicators for fully automatic and semiautomatic machines, contact technical support: 1-800-522-6752. note: commercial pro-crimper ii maintenance and repair hand tool for wire size 28-24 awg [0.08-0.2mm 2 ] (ins. dia. max. .040 [1.02]), and wire size 24-20 awg [0.2-0.6mm 2 ] (ins. dia. max. .060 [1.52]) part no. 58448-2. note: die set part no. 58448-3 can be adapted for use with the 626 pneumatic tool system. ** there are power options available for these tools/dies. see battery powered crimp tool kit and sde electric terminator on page 30. note: all part numbers are rohs compliant except: t indicates non-rohs compliant. pin w ith insulation support
16 catalog 65910 dimensions are in inches and dimensions are shown for technical support revised 7-07 millimeters unless otherwise reference purposes only. usa: 1-800-522-6752 central america: 52-55-5-729-0425 specified. values in brackets specifications subject to change. canada: 1-905-475-6222 south america: 55-11-3611-1514 are metric equivalents. mexico: 01-800-733-8926 www.tycoelectronics.com amp precision pin and socket contacts signal contacts ( continued) without insulation support p in p in socket s ocket color wire contact contact part nos. tooling** code size ins. dia. finish pin socket strip form hand (loose range max. code strip form loose piece strip form loose piece applicator tool piece) 28-24 awg .068 a 205310-2 t 205311-3 t [0.08-0.2 1.73 c ?? mm 2 ] 24-20 awg .068 a 205202-2 t 205201-3 t 205201-5 t red [0.2-0.6 1.73 c 205202-6 t 205202-7 t 205201-6 t 205201-7 t ?? 91548-1 t dot mm 2 ] 22-18 a 745229-2 t 745229-4 t 745230-2 t 745230-4 t awg .068 b 1-745229-1 t 1-745230-1 t 1-745230-3 t green [0.4-0.8 1.73 c 745229-5 t 745229-7 t 745230-5 t 745230-7 t ?? 91513-1 t dot mm 2 ] d 745230-8 t . 085 [2.16] dia. max. .390 [9.91] .550 [14.0] .100 [2.54] point of m easurement .530 [13.46] .085 [2.16] dia. max. .0400 ?0015 [1.02 ?.034 ] d ia. . 150 [3.81] localized gold plate area size 20 df, crimp, snap-in (continued) ??for complete information on amp strip form applicators for fully automatic and semiautomatic machines, contact technical support: 1-800-522-6752. note: wire insulation diameter is limited by the connector housing cavity and clearance for the insertion/extraction tool. **there are power options available for these tools/dies. see battery powered crimp tool kit and sde electric terminator on page 30. note: all part numbers are rohs compliant except: t indicates non-rohs compliant.
17 17 catalog 65910 dimensions are in inches and dimensions are shown for technical support revised 7-07 millimeters unless otherwise reference purposes only. usa: 1-800-522-6752 central america: 52-55-5-729-0425 specified. values in brackets specifications subject to change. canada: 1-905-475-6222 south america: 55-11-3611-1514 are metric equivalents. mexico: 01-800-733-8926 www.tycoelectronics.com amp precision pin and socket contacts note: all part numbers are rohs compliant. p in pin socket socket size 20 df, solder, snap-in contact size 0 *see product spec 108-40005 material pin rass socket hosphor bronze contact finish gold flash over nickel on entire contact, with additional .000030 [0.00076] gold on mating end contacts to be soldered to wire before being inserted into housing. 18 awg [0.8-0.9 mm 2 ] max. wire strip form loose piece contact no. contact no. pin socket pin socket 66570-2 66569-2 66570-3 66569-3 .085 [2.16] dia. max. .390 [9.91] .133 [3.38] max. .560 [14.22] ref. .085 [2.16] dia. max. .070 [1.78] dia. max. .580 [14.73] .0400 ?0015 [1.02 ?.034 ] dia. .155 [3.94] localized gold plate area signal contacts ( continued)
|
